Introduction
The DMP-1032 Engineer Computer is a standalone Vortex86 PC PCI/ISA Interface
Development Testing Protector. The “Engineer Computer” is equipped with a PC
system that protects its “own” system from over-voltage, rush current and shorting of interface signals during the development of your I/O card and specific custom-made
hardware during your experiment in laboratory.
This device allows you to perform your PC I/O card development
within a PC test platform that provides protection from faulty designs and
improper soldering resulting in shorting of signals. After a fault condition,
the PC system operates normally without hanging up, allowing the user to debug
the faulty target I/O card without powering off and repowering the connected
PC.
Outstanding Featuers
 |
Two selectable 16-bit ISA bus slots and 32-bit PCI 2.2 bus edge slots. |
|---|---|
|
100% protection for PC hardware signal pins, including short-circuit damage and input over voltage |
|
Each pin of the ISA and PCI slot expansion has signal protection. |
|
ISA and PCI slots also have DC output power protection. |
|
Over-current can be monitored through the debug port, to aid in troubleshooting. |
|
Real signal extension slot, all signals can be measured and tested on the extension slot. |
|
Remove interface cards anytime without the need to power off. |
|
ASIC designed with excellent stability and easy maintenance. |
|
Plug and play operation. |